Hot-Dipped Galvanized Iron Wire-manufacture,factory,supplier from China

Description:Galvanized iron wire is defined as a wire that has been coated with zinc to protect it from corrosion called galvanization. The galvanization process involves applying a zinc layer to the steel wire's surface, creating a barrier that prevents oxygen and water from reaching the steel, which causes it to rust.Characteristics:Hot-dip galvanized iron wire is immersed in heated and melted zinc liquid. The production speed is fast, and the coating is thick but uneven.

Description:Electro galvanized wire is made of high quality low carbon steel wire rod as raw material. The process of Electrogalvanizing involves electroplating, running a current of electricity through a saline/zinc solution with a zinc anode and steel conductor.Characteristics:Electro-galvanizing is to gradually coat the metal surface with zinc through the unidirectional current in the electroplating tank. The production speed is slow, the coating is uniform, and the thickness is thin, usually only 3-15 microns. The appearance is bright and the corrosion resistance is poor.

DescriptionIt is produced by the continuous galvanizing process, the rolled steel plate is continuously immersed in a plating bath containing molten zinc to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot dip method, but it is heated to about 500°C immediately after coming out of the tank to form an alloy film of zinc and iron.*Property & Spec.A. Good paint adhesion.B.

Description：Galvanized metal pipe is carbon metal pipe that have been dipped in a defensive zinc coating to stop corrosion and rust.

Description:Beam is a metallic cloth extensively used in construction, equipment manufacturing, bridges, roads, railways, aerospace and different fields. It is a hot-rolled metal with an "I"-shaped cross-section, so it is referred to as I-Beam.Property:A. High strengthB. Wear resistanceC. Corrosion resistanceD. Non-toxic and harmlessFeatures:The specs of I-beam are expressed in centimeters of waist width. For example, the waist width of No. 10 I-beam is 10cm.

DescriptionGalvanized metallic plate is a form of steel plate that is lined with a layer of metal zinc to give up corrosion and extend its provider life. This variety of zinc lined metallic plate is recognised as galvanized metallic plate.Mechanical properties(1) Tensile test:① Performance indicators: Generally speaking, totally structural, tensile, and deep drawing galvanized sheets have tensile standard overall performance requirements.

Galvanized Steel Coil is in order to prevent the surface of the steel plate from corrosion to extend its service life, the surface of the steel plate is coated with a layer of metallic zinc, this zinc-coated steel plate is called galvanized sheet. It is used cold rolled steel coil as substrates by a continuous hot-dip process. This method tightly adheres the coating to the steel with an iron-zinc alloy bonding layer formed by a diffusion process while the heated steel strip is in contact with the molten zinc.

Hot Dipped Galvanized Steel Sheet (GI sheet) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface.

Description：Galvanized steel pipe is carbon steel pipe that have been dipped in a protective zinc coating to prevent corrosion and rust.

Introduction:PPGL galvanized sheet is a high-quality building material made from cold-rolled substrates processed by galvanizing process. This material adopts the hot-dip galvanizing process, which reacts the zinc solution with the surface of the substrate to form a dense zinc iron alloy layer.

Introduction:PPGL galvanized sheet is a notable constructing cloth made from cold-rolled substrates processed via galvanizing process. This cloth adopts the hot-dip galvanizing process, which reacts the zinc answer with the floor of the substrate to shape a dense zinc iron alloy layer.

Hot Dipped Galvanized Steel Sheet (GI sheet) is produced by using passing the Full Hard sheet which has passed through the acid washing technique and rolling manner thru the zinc pot, thereby making use of zinc movie to the surface.

For galvanized/Galvalume coils, the thin steel plate is immersed in the molten zinc bath to make the surface of the zinc thin steel plate adhered. It is mainly produced by continuous galvanizing process, that is, the coiled steel sheet is continuously immersed in a galvanizing tank with molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This kind of steel plate is also manufactured by hot dipping method, but immediately after leaving the tank, it is heated to about 500°C to form an alloy film of zinc and iron.

Galvanized Steel Coil is in order to stop the floor of the metal plate from corrosion to prolong its carrier life, the floor of the metal plate is covered with a layer of steel zinc, this zinc-coated metal plate is referred to as galvanized sheet. It is used bloodless rolled steel coil as substrates by using a non-stop hot-dip process. This technique tightly adheres the coating to the metal with an iron-zinc alloy bonding layer shaped via a diffusion manner whilst the heated metal strip is in contact with the molten zinc.

Description:Cold rolled metal is hot-rolled metal that has been cleaned of iron oxide scale (pickled) and decreased to a unique thickness via a collection of rolling stands (tandem mill) or exceeded returned and forth via a reversing rolling mill.

*DescriptionSGCC, SECC, Single-sided or double-sided differential thickness galvanized steel, Alloy composite galvanized metallic sheet.S steel, G glavnized , C cold, C common, E elongation, D drawCharacteristicAluminum plated steel plate is a combination of the two most greatly used metals, iron and aluminum, in our every day lives. This variety of steel plate can completely make use of the characteristics of two metals and structure a metallic plate with one-of-a-kind properties.

Description:Cold rolled steel is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill.

DescriptionGalvanized steel plates are divided into ordinary electrolytic plates and fingerprint-resistant electrolytic plates.The fingerprint-resistant board is based on the ordinary electrolytic plate and adds a fingerprint-resistant treatment, which can resist sweat. It is generally used on parts that do not undergo any treatment. The grade is SECC-N.Ordinary electrolytic plates are divided into phosphating plates and passivation plates. Phosphating is more commonly used, and the brand name is SECC-P, commonly known as p material.

Hot rolled metal plates are shaped by means of heating metal billets to excessive temperatures and then present process non-stop rolling, cooling, and leveling processes.

*DescriptionSGCC, SECC, Single-sided or double-sided differential thickness galvanized steel, Alloy composite galvanized metal sheet.S steel, G glavnized , C cold, C common, E elongation, D draw *Property & Spec.A. Good fluidityB. Easy plastic processing and weldingC.

Description:Cold rolled metal is hot-rolled metal that has been cleaned of iron oxide scale (pickled) and decreased to a precise thickness thru a collection of rolling stands (tandem mill) or handed lower back and forth thru a reversing rolling mill. The metal can be heated to managed temperatures (annealing) relying on mechanical property requirements, and last rolled to the preferred thickness.Property&Spec:1. Compact size2. Smooth texture3.

Product IntroductionGalvanized coil is a thin steel plate that is immersed in a molten zinc bath to adhere a layer of zinc on its surface. The main production method is continuous galvanizing, which involves continuously immersing rolled steel plates in a molten zinc plating bath to produce galvanized steel plates; Alloy galvanized steel plate. This type of steel plate is also manufactured by hot dip method, but immediately after leaving the groove, it is heated to around 500 ℃ to form an alloy coating of zinc and iron.

Description:Cold rolled metal is hot-rolled metal that has been cleaned of iron oxide scale (pickled) and decreased to a precise thickness via a collection of rolling stands (tandem mill) or exceeded returned and forth thru a reversing rolling mill. The metal can be heated to managed temperatures (annealing) relying on mechanical property requirements, and ultimate rolled to the preferred thickness.Property&Spec:1. Tight dimensions2. Smooth texture3.

Hot rolled metal plate is an essential cloth broadly used in fields such as development and manufacturing. Its predominant features are mirrored in the following aspects. Hot rolled metal plates have notable mechanical properties, such as excessive power and toughness. This makes it a structural cloth that can stand up to massive hundreds and seismic requirements.